Please use this identifier to cite or link to this item:
http://dspace.utpl.edu.ec/handle/123456789/30533
Title: | Análisis del comportamiento de la mezcla asfáltica tibia y caliente fabricada con escoria en sustitución de agregados |
Authors: | Ortíz Viñan, Ana Paulina Bárcenas Tinoco, Óscar Israel |
Keywords: | Ecuador. Tesis digital. |
Issue Date: | 2022 |
Citation: | Bárcenas Tinoco, Ó. I. Ortíz Viñan, A. P. (2022) Análisis del comportamiento de la mezcla asfáltica tibia y caliente fabricada con escoria en sustitución de agregados [Tesis de Grado, Universidad Técnica Particular de Loja]. Repositorio Institucional. https://dspace.utpl.edu.ec/handle/123456789/30533 |
Abstract: | Abstract: In recent years, there has been an increase in research aimed at evaluating the behavior of warm asphalt mixtures, generated by the concern for preserving the environment, so new methods of manufacturing mixtures that use less energy, reduce the emission of polluting gases, and at the same time, by using waste materials such as slag, conserve the properties of the hot asphalt mixtures normally used, have been sought.This research makes a comparative analysis of the mechanical properties between warm and hot asphalt mixtures, using steel slag as a substitute for aggregates.Once the characteristics of the materials were obtained, properties of mixtures made with 5%, 7.5%, 10% and 12.5% of slag substitution for aggregates were determined, applying temperatures of 150 °C for hot mixtures and 110 °C for warm mixtures. The results of stability and flow tests determine that the warm and hot mixtures meet the established ranges; however, the warm mixture with 5% and 10% of slag show optimum results in terms of voids percentage. |
Description: | Resumen: En los últimos años se han incrementado las investigaciones orientadas a evaluar el comportamiento de mezclas asfálticas tibias, generados por la preocupación de preservar el medio ambiente, por lo que se buscan nuevos métodos de fabricación de mezclas que utilicen menos energía, reduzcan la emisión de gases contaminantes, y que a su vez al utilizar materiales de desecho como la escoria, conserven las propiedades de las mezclas asfálticas en caliente normalmente empleadas .La presente investigación realiza un análisis comparativo de las propiedades mecánicas entre las mezclas asfálticas en tibio y caliente, utilizando escorias iderúrgica como sustitución de los agregados .Una vez obtenidas las características de los materiales, se determinaron propiedades de mezclas elaboradas con 5%, 7,5%, 10% y 12,5% de sustitución de escoria por los agregados, aplicando temperaturas de 150 °C para mezclas en caliente y de 110 °C para mezclas tibias, cuyos resultados de ensayos de estabilidad y flujo determinan que las mezclas tibias y caliente cumplen los rangos establecidos; sin embargo la mezcla tibia con 5% y 10% de escoria presentan óptimos resultados de porcentaje de vacios. |
URI: | https://bibliotecautpl.utpl.edu.ec/cgi-bin/abnetclwo?ACC=DOSEARCH&xsqf99=129652.TITN. |
Appears in Collections: | Titulación de Ingeniería Civil |
Files in This Item:
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.