Please use this identifier to cite or link to this item: http://dspace.utpl.edu.ec/handle/123456789/32056
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorGuamán Balcázar, María del Cisnees_ES
dc.contributor.authorMorillo Chiriboga, José Camiloes_ES
dc.date.accessioned2022-09-24T12:53:21Z-
dc.date.available2022-09-24T12:53:21Z-
dc.date.issued2022es_ES
dc.identifier.citationMorillo Chiriboga, J. C. Guamán Balcázar, M. D. C. (2022) Caracterización física de películas activas con adición de extractos naturales [Tesis de Grado, Universidad Técnica Particular de Loja]. Repositorio Institucional. https://dspace.utpl.edu.ec/handle/123456789/32056es_ES
dc.identifier.otherCobarc: 1355952es_ES
dc.identifier.urihttps://bibliotecautpl.utpl.edu.ec/cgi-bin/abnetclwo?ACC=DOSEARCH&xsqf99=131245.TITN.es_ES
dc.descriptionResumen:El presente estudio se centra en la determinación de las propiedades físicas como solubilidad, color, transparencia, espesor, resistencia, elongación, permeabilidad a vapor de agua en biopelículas con dos tipos de extractos naturales limón y mango por separado, con el objetivo de determinar el efecto de estos componentes en las diferentes propiedades físicas. Dentro de sus componentes base el quitosano, almidón, Pva, glicerol y ácido acético juegan un rol muy importante a la hora de formar biopelículas. Para el ensayo de solubilidad, el añadir extracto de limón produjo un aumento en su porcentaje en un medio con agua, mientras que en un medio con metanol este se redujo a un punto medio entre ambos; para el extracto de mango los niveles de solubilidad fueron por debajo del 55% para ambos medios, los resultados obtenidos para color y transparencia son parte elegible del aspecto de la biopelícula a donde vaya a ser aplicada. Finalmente, los resultados obtenidos demostraron que la adición de extractos naturales modifica positivamente las propiedades físicomecánicas proporcionándoles mejores capacidades de resistencia, flexibilidad y permeabilidad que a los blancos.es_ES
dc.description.abstractAbstract:The present study focuses on the determination of physical properties such as solubility, color, transparency, thickness, resistance, elongation, water vapor permeability in biofilms with two types of natural extracts lemon and mango separately, with the objective of determining the effect of these components on the different physical properties. Among their base components, chitosan, starch, Pva, glycerol and acetic acid play a very important role in the formation of biofilms. For the solubility test, the addition of lemon extract produced an increase in its percentage in a medium with water, while in a medium with methanol it was reduced to a midpoint between both; for mango extract the solubility levels were below 55% for both media, the results obtained for color and transparency are an eligible part of the appearance of the biofilm where it is going to be applied. Finally, the results obtained showed that the addition of natural extracts positively modifies the physical-mechanical properties, providing them with better resistance, flexibility and permeability capacities than the white ones.es_ES
dc.language.isospaes_ES
dc.subjectEcuador.es_ES
dc.subjectTesis digital.es_ES
dc.titleCaracterización física de películas activas con adición de extractos naturaleses_ES
dc.typebachelorThesises_ES
Appears in Collections:Titulación de Bioquimica y Farmacia



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.