Please use this identifier to cite or link to this item:
http://dspace.utpl.edu.ec/handle/123456789/37022
Title: | Análisis de la aplicabilidad del hormigón elaborado con partículas de plástico y caucho combinados como sustitutos de los agregados |
Authors: | Ortíz Viñan, Ana Paulina Yaguana Castillo, Enrique David |
Keywords: | Ecuador. Tesis digital. |
Issue Date: | 2023 |
Citation: | Yaguana Castillo, E. D. Ortíz Viñan, A. P. (2023) Análisis de la aplicabilidad del hormigón elaborado con partículas de plástico y caucho combinados como sustitutos de los agregados [Tesis de Grado, Universidad Técnica Particular de Loja]. Repositorio Institucional. https://dspace.utpl.edu.ec/handle/123456789/37022 |
Abstract: | Abstract:This research takes into account the environmental damage generated by waste industrial and plastic, for which the objective is the implementation of waste of plastic particles (PET) and rubber, as substitutes for fine aggregates in design and concrete manufacturing. The physical-mechanical properties of the materials were analyzed whose results were used in the design of the concrete by means of the ACI 211.1 method, applying various percentages of PET and rubber, From the results of the tests of compressive strength of the specimens, it was determined that the concrete manufactured with the of 10% plastic and 0.5% rubber in substitution of the fine aggregate, reached resistance to 10.5% higher compression than conventional 28MPa concrete. |
Description: | Resumen: La presente investigación toma en cuenta el daño medio ambiental generado por los residuos industriales y plásticos, por lo que se plantea como objetivo la implementación de desechos de partículas de plástico (PET) y caucho, como sustitutos de los agregados finos en el diseño y fabricación de hormigón. Se analizaron las propiedades físico-mecánicas de los materiales cuyos resultados se emplearon en el diseño del hormigón mediante el método ACI 211.1, aplicando varios porcentajes de PET y caucho, De los resultados de los ensayos de resistencia a la compresión de las probetas, se determinó que el hormigón fabricado con el de 10% plástico y 0.5% de caucho en sustitución del agregado fino, alcanzó resistencias a la compresión superior en 10.5% al hormigón convencional de 28MPa. |
URI: | https://bibliotecautpl.utpl.edu.ec/cgi-bin/abnetclwo?ACC=DOSEARCH&xsqf99=133773.TITN. |
Appears in Collections: | Titulación de Ingeniería Civil |
Files in This Item:
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.