Please use this identifier to cite or link to this item: http://dspace.utpl.edu.ec/handle/123456789/52305
Title: Análisis de la inclusión de residuos de cigarrillo en la fabricación de ladrillos tradicionales
Authors: Aguirre Maldonado, Eduardo Bladimir
Loján Songor, Ronald Paúl
Keywords: Ecuador.
Tesis digital.
Issue Date: 2024
Citation: Loján Songor, R. P. Aguirre Maldonado, E. B. (2024) Análisis de la inclusión de residuos de cigarrillo en la fabricación de ladrillos tradicionales [Tesis de Grado, Universidad Técnica Particular de Loja]. Repositorio Institucional. https://dspace.utpl.edu.ec/handle/123456789/52305
Abstract: Abstract: This experimental study focused on evaluating the impact of the inclusion of the residue cigarette, known as cigarette butt (CB), in the manufacture of clay bricks cooked. Various dosages of CB (0%, 0.5%, 1%, 1.5%) were evaluated with cooking at temperatures of 850°C, 950°C and 1050°C for 12 hours, as well as in a traditional oven at 1000-1100°C for 24 hours. The influence of temperature and time of firing on flexural and compressive strength, along with additional variation testing dimensional, density, suction and absorption. The results revealed a positive improvement in the flexural strength for bricks with CB inclusion, highlighting that at low percentages, The brick with 0.5% CB reached 3.90 MPa, higher than the 3.12 MPa of the brick without CB, both cooked in a traditional oven. However, in the compressive strength, a reduction trend in bricks with CB fired for 12 hours, the best results can be seen at a firing temperature of 950°C, where the brick with 0% and 1% of CB have 9.01 MPa and 6.63 MPa respectively. Despite this, bricks with CB They demonstrated levels of resistance similar to the commercial ones in the study area, highlighting its viability as a sustainable alternative in brick production. Finally, the inclination towards improving the quality of the brick was ratified by increasing both temperature and cooking time.
Description: Resumen: Este estudio experimental se enfocó en evaluar el impacto de la inclusión del residuo de cigarrillo, conocido como colilla de cigarrillo (CB), en la fabricación de ladrillos de arcilla cocida. Diversas dosificaciones de CB (0%, 0.5%, 1%, 1.5%) fueron evaluadas con cocciones a temperaturas de 850°C, 950°C y 1050°C durante 12 horas, así como en un horno tradicional a 1000-1100°C durante 24 horas. Se examinó la influencia de la temperatura y el tiempo de cocción en la resistencia a flexión y compresión, junto con pruebas adicionales de variación dimensional, densidad, succión y absorción. Los resultados revelaron una mejora positiva en la resistencia a flexión para ladrillos con inclusión de CB, destacando que a bajos porcentajes, el ladrillo con 0.5% de CB alcanzó 3.90 MPa, superior al 3.12 MPa del ladrillo sin CB, ambos cocidos en horno tradicional. Sin embargo, en la resistencia a compresión, se observó una tendencia a la reducción en los ladrillos con CB cocidos por 12 horas, los mejores resultados se pueden apreciar a una temperatura de cocción de 950°C, donde el ladrillo con 0% y 1% de CB poseen 9.01 MPa y 6.63 MPa respectivamente. A pesar de esto, los ladrillos con CB demostraron niveles de resistencia similares a los comerciales de la zona de estudio, destacando su viabilidad como alternativa sostenible en la producción de ladrillos. Finalmente, se ratificó la inclinación hacia la mejora en la calidad del ladrillo al incrementar tanto la temperatura como el tiempo de cocció.
URI: https://bibliotecautpl.utpl.edu.ec/cgi-bin/abnetclwo?ACC=DOSEARCH&xsqf99=138557.TITN.
Appears in Collections:Titulación de Arquitectura



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.