Please use this identifier to cite or link to this item: http://dspace.utpl.edu.ec/handle/20.500.11962/23268
Title: Evaluación de la adsorción de fosfatos a partir de soluciones acuosas utilizando esponjas cerámicas de esmectita natural
Authors: Guaya Caraguay, Diana Elizabeth
Maza Chace, Luz Benigna
Keywords: Ecuador.
Tesis digital.
Issue Date: 2018
Citation: Maza Chace, L. B. Guaya Caraguay, D. E. (2018) Evaluación de la adsorción de fosfatos a partir de soluciones acuosas utilizando esponjas cerámicas de esmectita natural [Tesis de Grado, Universidad Técnica Particular de Loja]. Repositorio Institucional. https://dspace.utpl.edu.ec/handle/20.500.11962/23268
Abstract: Abstract: The present research study was carried out with the purpose of evaluating the adsorption of phosphates from aqueous solutions using ceramic sponges of natural smectite. For this, the modification of the natural smectite to the Al+3 form was made, the synthetic sponge molds were impregnated with a 45% by weight suspension of the modified clay and the sponges were subsequently calcined at 1000 °C. The maximum adsorption capacity of this material was 0.210 mg P/g. The experimental results were adjusted to the isothermal model of Langmuir, which indicates that the adsorption of phosphate ions occurs in specific active centers. The model that satisfactorily describes the kinetics is the pseudo first order, the intraparticular diffusion model allowed to determine that the particle diffusion, is the limiting stage that regulates the speed of adsorption. The saturation of the ceramic sponges in the continuous tests was reached at five hours. Finally, for initial solutions with concentrations lower than 25 ppm the 51% of the phosphorus adsorbed in the ceramic sponge was recovered.
Description: Resumen: El presente estudio de investigación, se realizó con la finalidad de evaluar la adsorción de fosfatos a partir de soluciones acuosas utilizando esponjas cerámicas de esmectita natural. Para ello se efectuó la modificación de la esmectita natural a la forma Al+3, se impregnó los moldes de esponjas sintéticas con una suspensión al 45% en peso de la arcilla modificada y posterior se calcinó las esponjas a 1000 °C. La capacidad máxima de adsorción de este material fue de 0.210 mg P/g. Los resultados experimentales se ajustaron al modelo isotérmico de Langmuir, lo cual indica que la adsorción de los iones fosfato se da en centros activos específicos. El modelo que describe satisfactoriamente la cinética es el pseudo primer orden, el modelo de difusión intraparticular permitió determinar que la difusión de partícula, es la etapa limitante que regula la velocidad de adsorción. La saturación de las esponjas cerámicas en los ensayos en continuo se alcanzó a las cinco horas. Finalmente, para soluciones iniciales con concentraciones menores a 25 ppm se recuperó el 51% del fósforo adsorbido en la esponja cerámica.
URI: https://bibliotecautpl.utpl.edu.ec/cgi-bin/abnetclwo?ACC=DOSEARCH&xsqf99=119798.TITN.
Appears in Collections:Ingeniero Químico



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.