Please use this identifier to cite or link to this item: http://dspace.utpl.edu.ec/handle/20.500.11962/23744
Title: Correlación de las características físicas de los ladrillos mediante el método de velocidad de pulso ultrasónico
Authors: Zúñiga Torres, Berenice Cecibel
López Herrera, Jéssica Elizabeth
Keywords: Ecuador.
Tesis digital.
Issue Date: 2019
Citation: López Herrera, J. E. (2019) Correlación de las características físicas de los ladrillos mediante el método de velocidad de pulso ultrasónico [Tesis de N/D, Universidad Técnica Particular de Loja]. Repositorio Institucional. https://dspace.utpl.edu.ec/handle/20.500.11962/23744
Abstract: Abstract:The use of non-destructive methods such as the ultrasonic pulse velocity method (UPV) can be of great help in the evaluation of masonry. However, due to the lack of research, the information is very limited and it reduce the use of this equipment in other materials. Therefore, the present study was carried out in order to establish correlations between the physical characteristics of the bricks and the UPV method in function of various temperatures. For this purpose, solid bricks were made with clays from four mines in the province of Loja; whose physical, chemical and mechanical properties were evaluated after the pieces had been fired, where measurements of velocity and modulus of elasticity were found through the use of ultrasonic Pundit equipment. Finally, it was determined that temperature affects both physical and mechanical parameters and that the correlation between the modulus of elasticity given by the equipment and the one calculated as a function of resistance, give values greater than 0.9. It verified that the results given by the Pundit equipment in the evaluation of bricks are reliability.
Description: Resumen: El uso de métodos no destructivos como el método de velocidad de pulso ultrasónico (UPV) puede ser de gran ayuda en la evaluación de mampostería, pero debido a la falta de investigaciones, la información se ve muy limitada y se reduce el uso de este equipo en otros materiales. Por lo tanto, el presente estudio se realizó con el fin de establecer correlaciones entre las características físicas de los ladrillos y el método UPV en función de varias de temperaturas. Para ello se realizó ladrillos macizos con arcillas de cuatro minas de la provincia de Loja; cuyas propiedades físicas, químicas y mecánicas se evaluaron luego de haber sido cocidas las piezas, donde las mediciones de velocidad y módulo de elasticidad se encontraron mediante el uso del equipo ultrasónico Pundit. Finalmente, se determinó que la temperatura afecta tanto a parámetros físicos como mecánicos y que la correlación entre módulo de elasticidad dado por el equipo y el calculado en función a la resistencia, dan valores mayores a 0.9, lo que valida la fiabilidad de los datos obtenidos por el equipo ultrasónico.
URI: https://bibliotecautpl.utpl.edu.ec/cgi-bin/abnetclwo?ACC=DOSEARCH&xsqf99=120822.TITN.
Appears in Collections:Ingeniero Civil



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.