Please use this identifier to cite or link to this item: http://dspace.utpl.edu.ec/handle/20.500.11962/27861
Title: Pruebas de extracción de vanadio a presión a partir de calizas negras provenientes del sector Puyango provincia de Loja
Authors: Manrique Carreño, John Luis
Jaramillo Quito, Johanna Elizabeth
Keywords: Ecuador.
Tesis digital.
Issue Date: 2021
Citation: Jaramillo Quito, J. E. Manrique Carreño, J. L. (2021) Pruebas de extracción de vanadio a presión a partir de calizas negras provenientes del sector Puyango provincia de Loja [Tesis de Grado, Universidad Técnica Particular de Loja]. Repositorio Institucional. https://dspace.utpl.edu.ec/handle/20.500.11962/27861
Abstract: Abstract: The objective of this research was to carry out tests for the extraction of vanadium under pressure leaching with sulfuric acid, where variables such as temperature and pressure were set in black limestone in the Puyango sector, Loja-Ecuador. A physical, chemical and mineralogical characterization was carried out where the mineral phases were obtained: calcite, quartz and in smaller quantities minerals that contain vanadium such as sherwoodite, rosite and ronneburguite. The oxidation states III, IV and V of vanadium were determined by speciation with distilled water, sulfuric acid and hydrochloric acid, where 0.59% of V (V) was obtained with distilled water; 6.95% with hydrochloric acid and 0.65% vanadium with sulfuric acid between states (IV) and (V), while 91.8% vanadium was obtained with state (III). During the hydrometallurgical process, the concentration and time were varied; Finally, the wet sample was washed with distilled water to increase the yield and obtain between 75% and 85% of vanadium recovery. With the proposed pressure leaching, it is concluded that a higher performance is obtained at high temperatures, concentrations and pressure.
Description: Resumen: La presente investigación tuvo como objetivo la realización de pruebas de extracción de vanadio a presión mediante lixiviaciones con ácido sulfúrico, donde se fijó variables como temperatura y presión en calizas negras del sector Puyango, Loja-Ecuador. Se realizó una caracterización física, química y mineralógica donde se obtuvo las fases minerales: calcita, cuarzo y en menores cantidades minerales que contienen vanadio como la sherwoodita, rosita y ronneburguita. Los estados de oxidación lll, lV y V de vanadio se determinaron mediante la especiación con agua destilada, ácido sulfúrico y ácido clorhídrico, donde se obtuvo 0,59% de V(V) con agua destilada; 6,95% con ácido clorhídrico y con ácido sulfúrico 0,65% de vanadio entre los estados (lV) y (V) mientras que con el estado (lll) se obtuvo 91,8% de vanadio. Durante el proceso hidrometalúrgico se varió la concentración y tiempo; por último, a la muestra húmeda se le realizó lavados con agua destilada para aumentar el rendimiento y obtener entre el 75% y 85%.de recuperación de vanadio. Con las lixiviaciones a presión propuestas se concluye que se obtiene un mayor rendimiento a altas temperaturas, concentraciones y presión.
URI: https://bibliotecautpl.utpl.edu.ec/cgi-bin/abnetclwo?ACC=DOSEARCH&xsqf99=125957.TITN.
Appears in Collections:Ingeniero Químico



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.