Please use this identifier to cite or link to this item:
http://dspace.utpl.edu.ec/handle/29.500.19856/80744| Title: | Análisis de Aerosoles Sedimentarios en el Entorno Urbano del Cantón Yantzaza |
| Authors: | Livisaca Chumapi, Jenny Patricia |
| Director: | Del Pozo Meza, David Emmanuel |
| Keywords: | Ecuador. Tesis digital. |
| Issue Date: | 2026 |
| Citation: | Livisaca Chumapi, J. P. Del Pozo Meza, D. E. (2026) Análisis de Aerosoles Sedimentarios en el Entorno Urbano del Cantón Yantzaza [Tesis de Grado, Universidad Técnica Particular de Loja]. Repositorio Institucional. https://dspace.utpl.edu.ec/handle/29.500.19856/80744 |
| Abstract: | Abstract: The curricular integration project aimed to evaluate the chemical composition of settleable aerosols in the urban area of the Yantzaza canton through the application of the ASTM D1739 - 98 method (method 502), in order to quantify the concentrations of settleable particulate matter (SPM) and to carry out its elemental analysis by atomic absorption spectrometry (AAS) at four monitoring stations. The results were compared with the guideline values of Ministerial Agreement 097-A and the recommendations of the World Health Organization (WHO). During a continuous monitoring period of three months, in which 12 samples were analyzed, it was determined that nine of them exceeded the WHO guideline value (0.5 mg/m²/month); on the other hand, seven samples exceeded the national limit of 1 mg/m²/month. At the Gasolinera and Terminal stations, higher concentrations were recorded, with maximum values of 7.13 mg/m²/month and 3.09 mg/m²/month, respectively. Likewise, the presence of heavy metals such as cadmium (Cd), arsenic (As), chromium (Cr), and copper (Cu) was identified, with variable concentrations. The statistical analysis showed that cadmium presented the highest positive and significant correlation with SPM. |
| Description: | Resumen: El trabajo de integración curricular tuvo como objetivo evaluar la composición química de aerosoles sedimentables en el área urbana del cantón Yantzaza mediante la aplicación del método ASTM D1739-98 (método 502), para cuantificar las concentraciones de material particulado sedimentable (MPS) y realizar su análisis elemental por espectrometría de absorción atómica (AAS) en cuatro estaciones de monitoreo. Los resultados se compararon con valores guía del Acuerdo Ministerial 097-A y las recomendaciones de la Organización Mundial de la Salud (OMS). Durante un intervalo de monitoreo continuo de tres meses donde se analizó 12 muestras, donde se determinó que nueve de ellas superaron el valor guía de la OMS (0,5 mg/m²/mes), por otro lado, siete muestras superaron el límite nacional de 1 mg/m²/mes. En Las estaciones Gasolinera y Terminal se registró concentraciones más elevadas, con valores máximos de 7,13 mg/m²/mes y 3,09 mg/m²/mes, respectivamente. Asimismo, se identificó la presencia de metales pesados como cadmio (Cd), arsénico (As), cromo (Cr) y cobre (Cu), con concentraciones variables. El análisis estadístico evidenció que el cadmio presentó correlación positiva y significativa más alta con el MPS. |
| Identifier : | Cobarc: 1379671 |
| URI: | https://bibliotecautpl.utpl.edu.ec/cgi-bin/abnetclwo?ACC=DOSEARCH&xsqf99=151372.TITN. |
| Type: | bachelorThesis |
| Appears in Collections: | Ingeniería Ambiental |
Files in This Item:
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
