Please use this identifier to cite or link to this item: http://dspace.utpl.edu.ec/jspui/handle/20.500.11962/20707
Title: Flotación del material de la Concesión MM, del condominio sur, Nambija.
Authors: León Balcázar, Bertha Sofía
metadata.dc.contributor.advisor: Sanmartín Gutiérrez, Víctor Aurelio
Keywords: Flotación
molienda
pH
reactivos de flotación
balance Metalúrgico
rendimiento
metadata.dc.date.available: 2017-09-28T15:02:18Z
Issue Date: 2017
Citation: León Balcázar, Bertha Sofía. (2017). Flotación del material de la Concesión MM, del condominio sur, Nambija. (Trabajo de titulación de Geología y Minas). UTPL. Loja.
Abstract: The present work of the investigation called Flotation of the material of the MM compression of the South condominium, námbra was realized in the phases that the same ones were used to determine the optimal conditions for the recovery of the floated material. The first part consisted in the characterization of the sample and preparation for the subsequent flotation. In the characterization of sample it is possible to determine that the most predominant minerals are: calcite, epitote, chlorite, albite, grosularia and in smaller amounts of quartz. In the characterization of the sample, the optimum grinding times were established for the different grain sizes. In the second phase, the fleets where the grain size, the pH, the collector concentration and the optimum conditions to work were obtained were 200 (74μm), pH 10 and collector concentration (404 - G) of 75 g / Ton, with these three factors together a 90% recovery was obtained.
Description: El presente trabajo de investigación denominado Flotación del Material de la Concesión MM, del Condominio Sur, Nambija fue realizado en dos fases las mismas que sirvieron para determinar las condiciones óptimas para la recuperación del material flotado. La primera parte consistió en la caracterización de la muestra y preparación para la posterior flotación. En la caracterización de muestra se pudo determinar que los minerales más predominantes son: calcita, epidota, clorita, albita, grosularia y en menores cantidades cuarzo. En la caracterización de la muestra se estableció los tiempos óptimos de molienda para los diferentes tamaños de grano. En la segunda fase se realizó las flotaciones en donde se varió el tamaño de grano, el pH, la concentración de colector y se obtuvieron las condiciones óptimas para trabajar las cuales son malla 200 (74µm), pH de 10 y concentración de colector (404 - G) de 75 g/Ton, con estos tres factores juntos se obtuvo una recuperación del 90 %.
metadata.dc.identifier.other: 1271791
URI: http://dspace.utpl.edu.ec/handle/20.500.11962/20707
metadata.dc.type: bachelorThesis
Appears in Collections:Ingeniero en Geología y Minas

Files in This Item:
File Description SizeFormat 
León Balcázar, Bertha Sofia.pdf3.98 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.