Bitte benutzen Sie diese Kennung, um auf die Ressource zu verweisen: http://dspace.utpl.edu.ec/handle/29.500.19856/80845
Titel: Caracterización morfoestructural del monoclinal del borde oriental del sector la Merced parroquia Malacatos
Autor(en): Zhanay Banda, Carlos Fabricio
Director: Guarderas Ortiz, María Fernanda
Stichwörter: Ecuador.
Tesis digital.
Erscheinungsdatum: 2026
Zitierform: Zhanay Banda, C. F. Guarderas Ortiz, M. F. (2026) Caracterización morfoestructural del monoclinal del borde oriental del sector la Merced parroquia Malacatos [Tesis de Grado, Universidad Técnica Particular de Loja]. Repositorio Institucional. https://dspace.utpl.edu.ec/handle/29.500.19856/80845
Zusammenfassung: Abstract: The work carried out on the eastern edge of the La Merced sector, Malacatos parish, was based on characterizing its structural geometry through the analysis of topographic maps, satellite images, and field surveying by means of transects at a scale of 1:10,000. In the satellite images, landform shapes were analyzed. A geometry in the shape of an open C toward the E was identified, this being the surface expression of a fold at depth. This was corroborated by the interpretation of contour lines that show patterns with the same geometry but are cut by a drainage approximately in the center of the polygon. In the transect-based survey, three lithostratigraphic sequences were identified, which were correlated with the stratigraphy of previous studies to determine their relative age. In addition, structural data from the S0 planes were measured and analyzed through stereographic projection on the Schmidt net. This allowed the definition of an asymmetric anticline with an inclined axis and axial plane and a tight interlimb angle. On the other hand, the surface expression of this anticline is a structural morphology that results from its combination with differential erosion.
Beschreibung: Resumen: El trabajo realizado en el borde oriental del sector La Merced, parroquia Malacatos se basó en caracterizar su geometría estructural mediante el análisis de mapas topográficos, imágenes satelitales y el relevamiento de campo mediante transectos a escala 1:10000. En las imágenes satelitales se analizaron las formas de los relieves. Se identificó una geometría en forma de C abierta hacia el E, siendo esta la expresión superficial de un pliegue a profundidad. Esto se corroboró con la interpretación de las curvas de nivel que presentan patrones con la misma geometría pero cortadas por un drenaje aproximadamente en el centro del polígono. En el relevamiento por transectos se identificaron tres secuencias litoestratigráficas que se correlacionaron con la estratigrafía de trabajos previos para determinar su antigüedad relativa. Además, se midieron datos estructurales de los planos S0 para analizarlos mediante proyección estereográfica en la falsilla de Schmidt. Permitiendo definir un anticlinal asimétrico con eje y plano axial inclinados y ángulo interflancos apretado. Por otro lado, la expresión superficial de esta anticlinal es una morfología estructural que resulta de la combinación con la erosión diferencial.
Identifier : Cobarc: 1379791
URI: https://bibliotecautpl.utpl.edu.ec/cgi-bin/abnetclwo?ACC=DOSEARCH&xsqf99=151494.TITN.
Type: bachelorThesis
Enthalten in den Sammlungen:Titulación de Geología y Minas

Dateien zu dieser Ressource:


Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt.